Submerged Electromagnetic Pulse Valve

The working principle of the submerged electromagnetic pulse valve, DMF-Y submerged electromagnetic pulse valve (also known as diaphragm valve) is the compressed air "switch" of the ash spray system of the pulse bag dust collector. Controlled by the output signal of the pulse blowing controller, the filter bag is sprayed one by one (chamber) to clean the dust, so that the resistance of the dust collector is kept within the set range to ensure the processing capacity and dust collection efficiency of the dust collector.
Botou Xintian SRD cement plant dust collector is a high-efficiency dust removal equipment for cement plants developed by our company. It uses proprietary technology to collect dust generated by cement plant production. Our company has become the designated supplier of dust removal equipment for many major cement plants and is one of the most trusted manufacturers of cement dust collector equipment in China by customers.
When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the rear air chamber will be close to the diaphragm assembly of the valve outlet, and the electromagnetic pulse valve is in the "closed" state.

The electrical signal of the pulse injection controller makes the electromagnetic pulse valve armature move back, the air chamber release hole behind the valve opens, the rear air chamber quickly loses pressure, the diaphragm assembly moves back, the compressed air is sprayed through the valve outlet, and the electromagnetic pulse valve is in the "open" state.

The electrical signal of the pulse injection control instrument disappears, the electromagnetic pulse valve armature resets, the vent hole of the rear air chamber is closed, and the pressure of the rear air chamber increases so that the diaphragm assembly is close to the outlet of the valve, and the electromagnetic pulse valve is in the "closed" state.

The electrical signal is timed in milliseconds, and the moment the pulse valve is opened, a powerful impact airflow is generated, so as to achieve instant blowout.

The meaning of the solenoid valve symbol
The solenoid valve symbol consists of a box, an arrow, a "T", and a character. The meaning of the solenoid valve graphic symbol is generally as follows:

1, the working position of the valve is indicated by the box, and each box represents a working position of the solenoid valve, that is, the "bit". There are several boxes that indicate that there are several "bits", such as two three-way means that there are two working positions. The "non-powered" and "powered" in the figure above are two different working positions.
2. Identify normal bits. The solenoid valve has two or more working positions, one of which is the normal position, that is, the position of the spool when it is not energized. For two-position valves, a two-position valve with spring return takes the path state in the box near the spring as its normal position. For three-position valves, the median in the graphic symbol is the normal bit. When drawing the system diagram, the oil/gas circuit should generally be connected to the normal position of the reversing valve. The arrow in the box indicates that the two interfaces are connected.
4. The symbol "T" in the box indicates that the interface is disconnected.
5, the number of interfaces connected to the outside of the box is several, which means several "pass".
6, in general, the inlet end of the fluid is represented by the letter P, the outlet is represented by R, and the interface connected between the valve and the actuator is represented by A, B, etc.
As a supplier in China, our company is a factory integrating industry and trade. Right-angle pulse solenoid valve products have low prices, high quality and obvious advantages, and customers around the world have purchased them for several years.